126″ Diagonal Ultra Short Throw ALR Projector Screens

126″ Screen Viewing Distance: Recommended viewing distance from the screen’s surface to eyes while seated for a 126-inch diagonal 16:9 aspect ratio projection screen is within the range of 12.6 feet (151 inches) to 18.9 feet (227 inches), from most immersive to least immersive.

126″ Image Width and Height: Rectangular dimensions for an exactly 126-inch diagonal 16:9 aspect ratio projected image onto a perfectly-flat, vertical wall are about 109.9 inches wide by 61.7 inches high.

Elite Screens offers a 126″ diagonal plug-and-play Cinematic Lenticular electric motorized free-standing floor-rising UST ALR (Ambient Light Rejecting) projection screen which rises and retracts at the push of a button and is easy to set up and use with a UST projector sitting directly on the floor. Elite Screens also offers a 126″ diagonal Cinematic Lenticular electric motorized wall/ceiling-mount drop-down UST ALR projection screen that lowers and retracts at the push of a button, which must be properly aligned with the projector’s projected image, hung from the wall or ceiling, and plugged into an AC outlet for power.

126″ Cinematic Lenticular Electric Motorized, Floor-Rising UST ALR Screen

The Elite Screens FTE126H3-CLR5 126″ diagonal electric motorized floor-rising UST ALR screen [Elite Screens link] [buy at Amazon] is the “smallest” free-standing model available from the Kestrel Tab-Tension CLR 5 Series. It utilizes StarBright CLR 5 lenticular screen material which features a 0.8 gain, absorbs 80% of overhead/ceiling ambient light, and provides a wide 170° viewing angle. The screen rises from and lowers into its black housing at the push of a button using a scissor-backed spring riser to provide a taut, flat, and ripple-free projection surface necessary for ultra short throw projectors. Programmable vertical rise position for precise installation. Includes IR, RF, and wall box controller remotes. Wall box and RF remote are 12v trigger ready. The width of the housing with power plug is 121.5″ and the fully-extended height combining the 63″ fabric height, 12″ bottom black border, and 5.6″ housing height is 80.6″.

126″ Cinematic Lenticular Electric Wall/Ceiling-Mount Drop-Down Screen

The Elite Screens STT126XH-CLR5 Starling Tab-Tension 126″ diagonal electric motorized drop-down UST ALR screen [Elite Screens link] [NOT available at Amazon] utilizes Starbright CLR 5 material with a lenticular sawtooth micro-structure which features a 0.8 gain, absorbs up to 80% of overhead/ceiling ambient light, and provides an ultra wide 170° viewing angle. The screen lowers and rises on command to provide a tab-tensioned flat, taut, and ripple-free projection surface.

Included are a pair of wall brackets for a flush wall/ceiling installation, along with a pair of eye-bolt screws that attach to the top of the case for a suspended ceiling installation. Programmable vertical drop position for precise installation. SWIFT RC-1 control system includes IR, RF, and wall box controller remotes. Wall box and RF remote are 12v trigger ready. Width of the screen’s white housing is 125″ and the screen’s overall fully-extended height is 80.6″ including housing and the 12″ top and 2.2″ bottom black masking.

This page was last updated on May 18, 2025.

B0DZ6SQBWV B0DQYVGL61